d5bc60b9

2.4.4. Replacement of the relay of pressure of oil (Z10XE, Z10XEP)

Removal
Open a cowl.
Dismantle the oil 1 pressure relay.
Disconnect the socket of a plait of wires.
Substitute the reception pallet.
Clean sealing surfaces of a head of cylinders and relay of pressure of oil.
Installation
Install the oil pressure relay.
Replace a sealing ring.
Tighten the relay of pressure of oil and tighten the moment of an inhaling 20 N · m.
Attach the socket of a plait of wires.
Check and if necessary modify the level of engine oil.
Close a cowl.