d5bc60b9

4.5.3. Removal and installation of the stabilizer

Removal
Remove 2 back wheels.

NOTE
Mark the provision of rather drum nave.

Turn out 2 screws of 1 fastening of the stabilizer on the back bridge.

NOTE
You watch ustanovkany position of fixing screws.

Remove the stabilizer 3 from the back bridge.
Wring out from the back bridge a mandrel from soft metal 2 the stabilizer on the one hand.
Remove from the back bridge and remove the stabilizer through lateral face.
Remove the buffer 4 from the stabilizer.

Installation
Install the stabilizer 3 on the back bridge.
Push sideways the stabilizer to the back bridge.
Push the buffer 4 on the stabilizer.
Press the stabilizer a mandrel from soft metal 2 to ustanovkany situation in the back bridge.
Install the stabilizer with 2 screws and a nut 1 on the back bridge.

NOTE
You watch ustanovkany position of fixing screws. Screws are installed from below up on the back bridge.

Tighten 2 new screws 1 moment of 60 N · m + 15 °.
Establish 2 back wheels – 110 N · to m.

NOTE
Observe the provision of marking.