d5bc60b9




7.2.4. Removal and installation of back fog lights

Removal
Dismantle a protective covering of a back wheel niche, unscrew a plastic nut of fastening 1.
Unscrew the Torx 3 screw.
Remove a protective covering 3.
Dismantle back fog lights.
Unblock and disconnect the socket of a plait of wires of 2 back fog lights.
Turn off the screw 1.
Remove back fog lights.
Remount or replace the glow lamp.
Turn off the glow lamp with the boss 3 and remove.
Unscrew and remove the glow lamp.

Installation
Establish back fog lights.
Insert back fog lights.
Tighten the screw.
Connect and fix the socket of a plait of wires of back fog lights.
Carry out an inspection of work of lamps.
Establish a protective covering of a back wheel niche.
Insert a protective covering, tighten a plastic nut of fastening.
Tighten the Torx screw.