d5bc60b9

7.2.6. Replacement of the glow lamp of passing beam

Removal
Dismantle the glow lamp of passing beam.
Dismantle a protective cap (shooter).
Press the glow lamp down at the plait socket provodov3.
Remove the glow lamp.
Disconnect the socket of a plait of wires 2.

Installation
Install the glow lamp of passing beam.
Connect the socket of a plait of wires.
Insert the glow lamp with the socket of a plait of wires.

NOTE
Pay attention to the correct assembly situation.

Establish a protective cap.
Insert a protective cap and record.
Replacement of the glow lamp of xenon headlights

Removal
Dismantle headlights.

ATTENTION
It is impossible to touch elements of xenon passing beam at the turned-on passing beam. Switch off ignition and the switch of light. The central socket of a plait of wires of headlights has to be disconnected.

Dismantle the module of ignition of a xenon headlight.
Unblock and remove a protective cap of a xenon headlight.
Unscrew the puskoreguliruyushchy device of a xenon lamp 1.
Dismantle a xenon lamp 3kh unscrew the screw from a lock ring 1.
Remove a lock ring.
Remove a xenon lamp 2.

Installation
Establish a xenon lamp.

NOTE
Pay attention to coding.

Insert a lock ring, tighten the screw of a lock ring.
Install the module of ignition of a xenon headlight.
Connect the puskoreguliruyushchy device of a xenon lamp and record.
Establish a protective cap of a xenon lamp.
Adjust headlights.
Carry out an inspection of work of lamps.