2.10.15. System of release (Z18 XE)
On the scheme situation and an arrangement of separate knots of system of release is shown below.
- 1. Operation and maintenance of the car
- 2. Engine
- 2.1. Petrol Z10XE, Z10XEP, Z12XE, Z12XEP DOHC-I engines
- 2.2. Mechanical part of petrol Z10XE, Z10XEP, Z12XE, Z12XEP DOHC-I engines
- 2.3. Cooling system
- 2.4. Lubrication system
- 2.5. System of injection
- 2.6. Petrol engines – the general procedures of check
- 2.7. Mechanical part of the engine
- 2.8. Test and repair operations of components of a mechanical part of the engine
- 2.9. Cooling system
- 2.10. System of injection of fuel of petrol engines
- 2.10.1. Removal and installation of fuel nozzles
- 2.10.2. Replacement of a fuel-supply line of high pressure (The pump of high pressure – the pressure chamber)
- 2.10.3. Module of the fuel pump
- 2.10.4. Replacement of the module of a dosage
- 2.10.5. Replacement of the regulator of pressure of fuel
- 2.10.6. Replacement of damping fuel return case
- 2.10.7. Replacement of the fuel level sensor
- 2.10.8. Fuel tank
- 2.10.9. Replacement of a tube of a jellied mouth of the fuel tank (petrol engines)
- 2.10.10. System of catching of vapors of fuel
- 2.10.11. Replacement of a forward ventilating tube
- 2.10.12. Removal and installation of container with absorbent carbon
- 2.10.13. Removal and installation of the sensor of a mass consumption of air
- 2.10.14. System of release (Z 14 XEP, Z 14 XEL, Z 16 XEP)
- 2.10.15. System of release (Z18 XE)
- 2.11. Lubrication system
- 3. Transmission
- 4. Running gear
- 5. Steering mechanism
- 6. Brake system
- 7. Onboard electric equipment
- 8. Body
- 9. Schemes of electric equipment
