d5bc60b9 сращенный мебельный щит - купить щит сращенный сосна.




2. Engine

Petrol Z10XE, Z10XEP, Z12XE, Z12XEP DOHC-I engines
 Number of the engine
 Check of pressure of oil (Z10XE, Z10XEP)
 Check of a compression of the engine (Z10XE, Z10XEP)
 Check of phases of gas distribution (Z10XE, Z10XEP, without conditioner)
 Check of pressure of compression (Z10XE, Z10XEP, with the conditioner)
 Check of pressure of fuel (Z10XE, Z10XEP, with the conditioner)
Mechanical part of petrol Z10XE, Z10XEP, Z12XE, Z12XEP DOHC-I engines
 Regulation of phases of gas distribution by impact on the Z10XEP, Z12XE, Z14XEP camshaft (since the end of 2004 till 2005 release)
 Adjustment of phases of gas distribution (Z10XE, Z10XEP, without conditioner)
 Replacement of a poliklinovy belt (Z10XE, Z10XEP, with the conditioner)
 Head of the block of cylinders
 Removal and installation of the GRM case (Z10XE, Z10XEP)
 Repair of the engine (Z10XE, Z10XEP, without conditioner)
 Block of cylinders, krivoshipno-conrod mechanism and piston group
Cooling system
 To fill filling of the cooling system and removal of air (Z10XE, Z10XEP)
 Replacement of the sensor of temperature of cooling liquid (Z10XE, Z10XEP, without conditioner)
 Removal and installation of the pump of cooling liquid (Z10XE, Z10XEP, with the conditioner)
 Removal and installation of the thermostat with a branch pipe of cooling liquid (Z10XE, Z10XEP, without conditioner)
 Replacement of a radiator (Z10XE, Z10XEP, with the conditioner)
Lubrication system
 Removal and installation of the case of an oil filter (Z10XE, Z10XEP, without conditioner)
 Replacement of engine oil (Z10XE, Z10XEP)
 Removal and installation of the oil pallet (Z10XE, Z10XEP, without conditioner)
 Replacement of the relay of pressure of oil (Z10XE, Z10XEP)
System of injection
 Replacement of fuel nozzles (one or all) (Z10XE, Z10XEP, without conditioner)
 Replacement of the fuel filter (petrol engines)
 Removal and installation of the electric fuel pump
 Replacement of consolidation of a final collector (Z10XE, Z10XEP, without conditioner)
Petrol engines – the general procedures of check
 General information
 Check of loss of pressure in the engine (engines of 1,4-1,6 l)
 Check of loss of pressure in the engine (the engine of 1,8 l)
 Check of a compression (engines of 1,4-1,8 l)
 Check of tightness of the engine (contents WITH in the cooling system)
 Measurement of a consumption of oil
Mechanical part of the engine
 Removal and installation of a flywheel (engine of 1,4 l)
 Replacement of a back epiploon of a bent shaft
 Replacement of consolidations of cores of valves (the established head of the block of cylinders)
 Check of an axial free wheeling of a bent shaft
 Removal and installation of a head of the block of cylinders (engine of 1,4-1,6 l)
Test and repair operations of components of a mechanical part of the engine
 Check of a gap in the conrod bearing
 Check of a gap in the conrod bearing
 Replacement of the conrod bearing
 Replacement of piston rings
 Replacement of the piston with a rod
Cooling system
 Filling and removal of air from the cooling system
 Check of tightness of the cooling system
 Removal and installation of the pump of cooling liquid
 Replacement of an intermediate cooler
System of injection of fuel of petrol engines
 Removal and installation of fuel nozzles
 Replacement of a fuel-supply line of high pressure (The pump of high pressure – the pressure chamber)
 Module of the fuel pump
 Replacement of the module of a dosage
 Replacement of the regulator of pressure of fuel
 Replacement of damping fuel return case
 Replacement of the fuel level sensor
 Fuel tank
 Replacement of a tube of a jellied mouth of the fuel tank (petrol engines)
 System of catching of vapors of fuel
 Replacement of a forward ventilating tube
 Removal and installation of container with absorbent carbon
 Removal and installation of the sensor of a mass consumption of air
 System of release (Z 14 XEP, Z 14 XEL, Z 16 XEP)
 System of release (Z18 XE)
Lubrication system
 Replacement of the oil pump (1,4 l)